DescriptionName
Theport through which Cisco UCS should communicate with the
TACACS+database.
Enteran integer between 1 and65535. Thedefault port is49.
Portfield
Thelength of timein seconds the systemshould spend tryingto
contactthe TACACS+ database before it times out.
Enteran integer from 1 to 60 seconds, or enter 0 (zero) to use the
globaltimeout value specified on theTACACS+ General tab. The
defaultis 5 seconds.
Timeoutfield
b) Click OK.
Step 5 ClickSave Changes.
What to Do Next
Forimplementations involving a single TACACS+ database, select TACACS+ as the primary authentication
service.
Forimplementations involving multiple TACACS+ databases, configure a TACACS+ provider group.
Deleting a TACACS+ Provider
Procedure
Step 1 Inthe Navigation pane, clickthe Admin tab.
Step 2 Inthe Admin tab, expandUser Management >TACACS+.
Step 3 Right-clickthe TACACS+ provider you want to delete and choose Delete.
Step 4 Ifthe CiscoUCS Manager GUI displays a confirmationdialog box, click Yes.
Configuring Multiple Authentication SystemsMultiple Authentication Systems
Youcan configure Cisco UCS to use multiple authentication systems by configuring the following features:
• Provider groups
• Authentication domains
Cisco UCS Manager GUI Configuration Guide, Release 2.0
146 OL-25712-04
Configuring Multiple Authentication Systems