Mitsubishi Electronics GOT1000 3.ACCESS RANGE FOR MONITORING, 3.1Access Range for Monitoring Stations on Network Systems, MELSECNET/H, MELSECNET/10

3.ACCESS RANGE FOR MONITORING

3.1Access Range for Monitoring Stations on Network Systems

3.1.1MELSECNET/H, MELSECNET/10, CC-Link IE Controller Network, CC-Link IE Field Network

Bus connection

(1)When connecting to multiple CPU system

•The GOT can monitor the control station and all the normal stations on the network.

Control station

GOT

*1

Normal Normal

station station

Normal station

• The GOT can monitor the control station and all the normal		Control station
stations on other networks.					*1
(For monitoring stations on other networks, be sure to set the	GOT				Control
routing parameter)		Normal		Normal	station
						Normal
When the Universal model QCPU is used as a relay station, the
		station
GOT can monitor stations with the station No.65 or later in the CC-				station		station
			Normal		Normal
Link IE controller network.
			station		station
• When connecting to the multiple CPU system, the GOT can		Control station
monitor CPU No.1 to No.4.
	GOT				Control
					station
		Normal
				Normal		Normal
		station		station			station
			Normal
			station
				Normal station

•Devices of other stations (other than devices B and W that are allocated by the network parameter) may not allow monitoring depending on their PLC CPU.

■ Monitor accessible range of other stations and setting method of monitor devices (Examples 1 to 2)

• The motion controller CPU (Q Series) at other stations cannot be monitored.

*1 The control station and normal station correspond to the master station and local station in the CC-Link IE field network respectively.

3 - 2	3. ACCESS RANGE FOR MONITORING
	3.1 Access Range for Monitoring Stations on Network Systems