3.2Access Range for Monitoring when Using Ethernet Connection

Access range

(1)MITSUBISHI PLC

The PLC can be monitored via the Ethernet module set in the Ethernet setting on GT Designer3.

The GOT can access CPUs on another Ethernet, MELSECNET/H, MELSECNET/10, CC-Link IE Controller Network, or CC-Link field network via the QCPU or QnACPU.

However, the GOT cannot monitor the CNC C70 on other networks.

(The GOT cannot monitor the AnNCPU on the CC-Link IE Controller Network, MELSECNET/H, and MELSECNET/10 networks)

For monitoring CPUs on the MELSECNET/H, MELSECNET/10, CC-Link IE Controller Network, and CC-Link field network, set the routing parameter.

For the routing parameter setting, refer to the following manuals.

•Routing parameter setting of the GOT

8. ETHERNET CONNECTION

•Routing parameter setting for accessing CPUs on the MELSECNET/H network system, or MELSECNET/10 network system

Q corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)

• Routing parameter setting for accessing CPUs on the CC-Link IE Controller Network CC-Link IE Controller Network Reference Manual

• Routing parameter setting for accessing CPUs on the CC-Link IE Field Network

MELSEC-Q CC-Link IE Field Network Master/Local Module User's Manual

CC-Link IE Field Network Ethernet Adapter Module User's Manual

Monitoring via the MELSECNET (II) or MELSECNET/B network cannot be performed.

GOT

Hub etc.

Gateway

(Router etc.)

MELSECNET/H etc.

POINT

(1)Host in the Ethernet connection

While the GOT is handled as the host in MELSECNET/H, MELSECNET/10 or CC-Link connection, the station (Ethernet module) set as the host in the Ethernet setting of GT Designer3 is handled as the host in Ethernet connection.

(2)Precautions when using the QCPU redundant system

When monitoring other networks, do not set the QCPU redundant system as a relay station.

If the QCPU redundant system is set as a relay station, the GOT cannot switch the monitoring target automatically when the system is switched.

(A timeout error occurs due to failed monitoring)

Various settings

For the Ethernet setting by GT Designer3, refer to the following.

8. ETHERNET CONNECTION

3. ACCESS RANGE FOR MONITORING

3 - 13

1

PREPARATORYFORPROCEDURESMONITORING 2

RANGESETBE

DEVICE CANTHAT 3

RANGEACCESS MONITORINGFOR 4

MONITORTOREDUNTANTSYSTEM HOW 5

CONNECTIONBUS 6

DIRECTTOCONNECTIONCPU 7

LINKCOMPUTER CONNECTION 8

ETHERNETCONNECTION

3.2 Access Range for Monitoring when Using Ethernet Connection