About system configuration

The following describes the system configuration of each connection included in this manual.

The configuration of equipment connected to GOT is shown.

The cable connecting the GOT to the equipment is shown.

The configuration of the GOT connected to equipment is shown.

For the option devices, refer to the following.

1.3 Option Devices for the Respective Connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QCPU

 

RS-422 connector

 

 

 

 

GOT

 

 

 

 

 

 

conversion Cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A representative example of the system configuration is described with an illustration.

Indicates the connection diagram number of cables to be prepared by the user.

Refer to the connection diagram section in each chapter.

Indicates the commercially available cable models that can be used.

Indicates the maximum distance between the PLC and GOT.

System Configuration Examples

(When connecting the PLC [MELSEC-Q] and GT16, with RS-422 cable)

1)Connect the RS-422 conversion cable [FA-CNV2402CBL] to the [MELSEC-Q].

2)Connect the option [GT16-C02R4-9S] to [GT16].

3)Connect [MELSEQ-Q] and [GT16] with the connection cable [GT01-C30R4-25P].

Since the above page was created for explanation purpose, it differs from the actual page.

A - 30