(1)Setting of the CPU No.
(a)When monitoring a single CPU system Set to 0.
(b)When monitoring a multiple CPU system Set the CPU No. (0 to 4) in [CPU No.] when monitoring a multiple CPU system.
When [CPU No.] is set to "0", the monitoring target differs depending on the connection method.
Connection method | Monitoring target |
• Direct CPU connection | Connected PLC CPU |
|
|
• Bus connection |
|
• Computer link connection |
|
• MELSECNET connection | Control CPU |
• Ethernet connection |
|
• |
|
|
|
(2)When monitoring link relay (B) and link register (W) assigned in link parameter and network parameter. Set the device link relay (B) and link register (W) running cyclic communication as [Host].
If it is set as [Other] in the network setting, the cyclic transmission is changed to the transient transmission regardless of the network type, resulting in delay of the object display.
(3)Setting the device by inputting directly from the keyboard
When setting the device by inputting directly from the keyboard, set the items as follows.
(For devices except BM and G)
Bit condition
Device number
Device name
CPU No.
PLC station number
N/W No.
Channel No.
(For device BM and CPU No. 0)
Device number
Head I/O number of buffer memory
Device name
(For device BM and CPU No. 1 to 4)
Device number
Head I/O number of buffer memory
Device name
CPU No. 1 to 4
(For device G and CPU No. 0)
Device number
Device name
Unit No.
(For device G and CPU No. 1 to 4)
Device number
Device name
Unit No.
CPU No. 1 to 4
2 - 4 | 2. DEVICE RANGE THAT CAN BE SET |