Utility setting for C Controller module

(c) Detail settings

(1)Q12DCCPU-V

Use SW3PVC-CCPU-E Ver.3.05F or later for the C Controller setting utility.

(a)Connection settings

 

 

Setting

Item

Set value

necessity at

GOT

 

 

 

 

connection

Target module*1

192.168.3.3 (Default)

 

Write authority

Mark the checkbox

 

 

 

 

User name*2

target

 

Password*2

password

 

Detailed settings

-

 

 

 

 

: Necessary : As necessary

: Not necessary

*1 If the IP address of the C Controller module has been changed, input the changed IP address or host name.

*2 If the account of the C Controller module has been changed, input the changed user name and password.

(b) Online operation

 

 

Setting

Item

Set value

necessity at

GOT

 

 

 

 

connection

IP address

192.168.3.1

 

 

 

 

Subnet mask

255.255.255.0

 

 

 

 

Default gateway

-

 

 

 

 

IP address settings CH2

-

 

 

 

 

: Necessary : As necessary : Not necessary

 

 

 

Setting

Item

 

Set value

necessity at

 

GOT

 

 

 

 

 

 

connection

Detailed settings

 

Refer to (3)

 

 

 

 

 

 

: Necessary : As necessary

: Not necessary

8 - 28

8. ETHERNET CONNECTION

 

8.4 PLC Side Setting