18.4 GOT Side Settings

18.4.1Setting communication interface (Communication settings)

Set the channel of the connected equipment.

2.

3.

4.

Click!

1. Select [Common] [Controller Setting] from the menu.

2. The Controller Setting window is displayed. Select the channel to be used from the list menu.

3. Set the following items.

•Manufacturer: Mitsubishi

•Controller Type: For GT16, GT15

MELSEC-QnA/Q/QS, MELDAS C6* For GT14, GT11

MELSEC-QnA/Q, MELDAS C6*

•I/F: Interface to be used

•Driver:

For direct connection to CPU

AJ71QC24, MELDAS C6* For ELSECNET/10 connection

MELSECNET/H

MELSECNET/10

For CC-Link (ID) connection CC-Link Ver2 (ID)

CC-Link (ID)

For Ethernet connection

Ethernet (MELSEC), Q17nNC, CRnD-700

4.The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.

Make the settings according to the usage environment.

18.4.2 Communication detail settings

Click the [OK] button when settings are completed.

POINT

The settings of connecting equipment can be confirmed in [I/F Communication Setting]. For details, refer to the following.

1.1.2 I/F communication setting

18.4.2Communication detail settings

Make the settings according to the usage environment.

(1) AJ71QC24, MELDAS C6*

Item

Description

Range

 

Set this item when change the

4800bps,

 

9600bps,

 

transmission speed used for

Transmission

19200bps,

communication with the connected

Speed

38400bps,

equipment.

 

57600bps,

 

(Default: 19200bps)

 

115200bps

 

 

 

 

 

 

Set this item when change the data

 

Data Bit

length used for communication with the

8bit (fixed)

connected equipment.

 

 

 

(Default: 8bit)

 

 

 

 

 

Specify the stop bit length for

 

Stop Bit

communications.

1bit (fixed)

 

(Default: 1bit)

 

 

 

 

 

Specify whether or not to perform a parity

 

Parity

check, and how it is performed during

Odd (fixed)

communication.

 

 

 

(Default: Odd)

 

 

 

 

 

Set the number of retries to be

 

Retry

performed when a communication

0 to 5times

timeout occurs.

 

 

 

(Default: 0time)

 

 

 

 

 

Set the time period for a communication

 

Timeout Time

to time out.

3 to 30sec

 

(Default: 3sec)

 

 

 

 

 

Set this item to adjust the transmission

 

Delay Time

timing of the communication request

0 to 300ms

from the GOT.

 

 

 

(Default: 0ms)

 

 

 

 

18 - 8

18. CNC CONNECTION

 

18.4 GOT Side Settings