Connecting the GOT and PLC in computer link connection(when connected to the QJ71C24(N)) (GX Configurator is not supported.)

1.

2.

3.

Click [Online] [Transfer Setup] in GX Developer.

The [Transfer Setup] is displayed.

Set the [Transfer Setup]:

PC side I/F

: Serial

PLC side I/F

: C24

Other station

: No specification

6. Double-click [Serial] of the PC side I/F to display [PC side I/F Serial setting].

7. Check-mark either of the following in [PC side I/F Serial setting].

When connecting the GOT and PC with serial When connecting the GOT to PC via modem

Mark the [RS-232C] checkbox.

When connecting the GOT and PC with USB

Mark the [USB] checkbox.

8. The screen returns to [Transfer Setup]. Click [Connection Test] to check if GX Developer has been connected to the QCPU (Q mode).

4.

5.

Return to [Transfer Setup] and double-click [C24] of the PLC side I/F to display [PLC side I/F detailed setting of C24].

Check [via GOT transparent mode] for [PLC side I/F detailed setting of C24].

22 - 40

22. FA TRANSPARENT FUNCTION

 

22.6 Personal Computer Side Setting