(2) Operational settings

(3) Open settings

Item

Setting

Setting

(with GOT connected)

 

 

Protocol

TCP

 

 

 

 

Open system

MELSOFT connection

 

Fixed buffer

Fixed buffer communication procedure

1

PREPARATORYFORPROCEDURESMONITORING 2

RANGESETBE

DEVICE CANTHAT 3

RANGEMONITORING

Item

Setting

Setting

(with GOT connected)

 

 

 

 

 

Communication

(Use default value.)

 

date code*1

 

 

 

IP address

192.168.0.19

 

Pairing open

Existence confirmation

Host station Port No. (DEC.)

(Use default value.)

ACCESS FOR 4

Initial timing*1

 

Send frame setting

(Use default value.)

 

TCP Existence

 

confirmation setting

 

 

:Required :Set if necessary :Not required

*1 Because the port No. 5551 is fixed, the GOT operates as follows, regardless of the setting for the item.

•Communication date code : [Binary code]

•Initial timing : [Always wait for OPEN]

(Communications are enabled while the programmable controller CPU stops.)

*2 The default value of IP address is 192.168.1.254. Set the IP address corresponding to the system configuration.

POINT

When changing Ethernet parameter

After writing the Ethernet parameter to the programmable controller CPU, turn off and then on, or reset the programmable controller CPU.

Transmission target device

IP address

Transmission target device

Port No. (DEC.)

:Required :Set if necessary :Not required

POINT

When connecting to multiple GOTs and peripheral devices

The number of protocols equivalent to that of the GOTs and devices must be set.

MONITORTOREDUNTANTSYSTEM HOW 5

CONNECTIONBUS 6

DIRECTTOCONNECTIONCPU 7

LINKCOMPUTER CONNECTION 8

ETHERNETCONNECTION

8. ETHERNET CONNECTION

8 - 39

8.4 PLC Side Setting