Mitsubishi Electronics GOT1000 6.4 GOT Side Settings, 6.4.2Communication detail settings

6.4.1Setting communication interface (Communication settings)

POINT

GOT Multi- Drop Connection

When using the serial multi-drop connection unit, refer to the following.

Set the channel of the connected equipment.

Click!

1. Select [Common] [Controller Setting] from the menu.

2. The Controller Setting window is displayed. Select the channel to be used from the list menu.

3. Set the following items.

•Manufacturer: Mitsubishi

•Controller Type: Set according to the Controller Type to be connected.

•I/F: Interface to be used

•Driver: Set either of the following according to the Controller Type to be connected.

For GT16, GT15, GT14, GT12, GT11 A/QnA/L/Q CPU, LJ71C24, QJ71C24

MELSEC-FX MELSEC-WS

For GT10 QnA/L/Q CPU MELSEC-A MELSEC-FX MELSEC-WS

4. The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.

Make the settings according to the usage environment.

Click the [OK] button when settings are completed.

POINT

The settings of connecting equipment can be confirmed in [I/F Communication Setting]. For details, refer to the following:

6.4.2Communication detail settings

Make the settings according to the usage environment.

(1) A/QnA/L/Q CPU, LJ71C24, QJ71C24

Item	Description	Range
	Set this item when change the
	transmission speed used for
	communication with the connected	9600bps,
	equipment.	9600bps,
	equipment.	19200bps,
Transmission	(Default: 115200bps)	19200bps,
Transmission	(Default: 115200bps)	38400bps,
Speed	When the setting exceeds the limit of	38400bps,
Speed	When the setting exceeds the limit of	57600bps,
	the connected equipment,	57600bps,
	the connected equipment,	115200bps
	communication is performed at the	115200bps
	communication is performed at the
	fastest transmission speed supported
	by the connected equipment.

	Set the number of retries to be
Retry	performed when a communication	0 to 5times
Retry	timeout occurs.	0 to 5times
	timeout occurs.
	(Default: 0time)

	Set the time period for a communication
Timeout Time	to time out.	3 to 30sec
	(Default: 3sec)

	Set this item to adjust the transmission
Delay Time	timing of the communication request	0 to 300 (ms)
Delay Time	from the GOT.	0 to 300 (ms)
	from the GOT.
	(Default: 0ms)

PREPARATORYFORPROCEDURESMONITORING 2

RANGESETBE

DEVICE CANTHAT 3

RANGEACCESS MONITORINGFOR 4

MONITORTOREDUNTANTSYSTEM HOW 5

CONNECTIONBUS 6

DIRECTTOCONNECTIONCPU 7

LINKCOMPUTER CONNECTION 8

ETHERNETCONNECTION

6. DIRECT CONNECTION TO CPU	6 - 25
6.4 GOT Side Settings