3. 4.

3. The [Communication Settings] appears.

4. Verify that the communication driver name to be used is displayed in the communication interface box to be used.

5. When the communication driver name is not displayed normally, carry out the following procedure again.

1.1Setting the Communication Interface

1

PREPARATORYFORPROCEDURESMONITORING 2

RANGESETBE

DEVICE CANTHAT 3

RANGEACCESS MONITORINGFOR 4

MONITORTOREDUNTANTSYSTEM HOW 5

CONNECTIONBUS 6

DIRECTTOCONNECTIONCPU 7

LINKCOMPUTER CONNECTION 8

ETHERNETCONNECTION

1. PREPARATORY PROCEDURES FOR MONITORING

1 - 35

1.5 Verifying GOT Recognizes Connected Equipment