2. Set the status observation.
Set the status observation so that the station number is switched when the faulty station information (SW70) of
MELSECNET/H turns ON in the project specified by choosing [Common] | [Status Observation]. | |||
|
|
|
| |
| Condition 1 | : SW70.b0 (while ON) | When b0 is ON, Station No. 1 is abnormal. | |
| Operation | : GD100=2 | Screen No. is changed to 2. | |
|
|
|
| |
|
|
|
| |
| Condition 1 | : SW70.b1 (while ON) | When b1 is ON, Station No. 2 is abnormal. | |
| Operation | : GD100=1 | Screen No. is changed to 1. | |
|
|
|
|
|
Make the setting so that the station number is switched when the faulty station information (GS231) from the station monitoring specified by selecting [Common] 
[Status Observation] turns ON.
Condition 1 | : GS231.b0 (while ON) | When b0 is ON, Station No. 1 is abnormal. |
Operation | : GD100=2 | Screen No. is changed to 2. |
|
|
|
|
|
|
Condition 1 | : GS231.b1 (while ON) | When b1 is ON, Station No. 2 is abnormal. |
Operation | : GD100=1 | Screen No. is changed to 1. |
|
|
|
1
PREPARATORYFORPROCEDURESMONITORING 2
RANGESETBE
DEVICE CANTHAT 3
RANGEACCESS MONITORINGFOR 4
MONITORTOREDUNTANTSYSTEM HOW 5
CONNECTIONBUS 6
DIRECTTOCONNECTIONCPU 7
LINKCOMPUTER CONNECTION 8
ETHERNETCONNECTION
4. HOW TO MONITOR REDUNTANT SYSTEM | 4 - 39 |
4.10 Switch the Monitor Target to the Control System Using the Script Function