12.3 GOT side settings
Set the channel of connecting equipment.
2.
3.
4.
Click!
1. Select [Common] 
[Controller Setting] from the menu.
2. The Controller Setting window is displayed. Select the channel to be used from the list menu.
3. Set the following items.
•Manufacturer: Mitsubishi
•Controller Type: Set according to the Controller Type to be connected.
•I/F: Interface to be used
•Driver:
4.The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
12.3.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting]. For details, refer to the following.
Make the settings according to the usage environment.
Item | Description | Range | |
Network | Set the network Type | • CC IE Field | |
Type*4 | |||
|
| ||
Network No. | Set the network No. of the GOT. | 1 to 239 | |
(Default: 1) | |||
|
| ||
|
|
| |
Station No. | Set the station No. of the GOT. | 1 to 120 | |
(Default: 1) | |||
|
| ||
|
|
| |
|
| • Online | |
| Set the operation mode of the GOT. | • Offline | |
Mode Setting | (Default: | • H/W test*1 | |
| Online (auto. reconnection)) | • | |
|
| test*1 | |
| Set the number of refreshes to |
| |
Refresh | secure the send/receive data in | 1 to 1000ms | |
Interval | station units during communication. | ||
| (Default: 25ms) |
| |
|
|
| |
| Set the hold/clear of input from the |
| |
Input for Error | station where the data link is faulty |
| |
due to some reason such as turning | Clear/Hold | ||
Station | the power OFF. |
| |
|
| ||
| (Default: Clear) |
| |
|
|
| |
| Set the number of retries to be |
| |
| performed when a communication |
| |
| timeout occurs. |
| |
Retry | When receiving no response after | 0 to 5times | |
| retries, the communication times |
| |
| out. |
| |
| (Default: 3times) |
| |
|
|
| |
Timeout | Set the time period for a |
| |
communication to time out. | 3 to 90sec | ||
Time | |||
(Default: 3sec) |
| ||
|
| ||
|
|
| |
| Set the delay time for reducing the |
| |
Delay Time | load of the network/destination PLC. | 0 to 300ms | |
| (Default: 0ms) |
| |
|
|
| |
| Set the monitor speed for the CC- |
| |
Monitor | Link IE field network. |
| |
This setting is not valid in all | High*2/Normal/Low*3 | ||
Speed | |||
systems. |
| ||
|
| ||
| (Default: High) |
|
(Continued to next page)
12 - 8 | 12. |
| 12.3 GOT side settings |