Mitsubishi Electronics GOT1000 2.1 MELSEC-QnU/DC,Q17nD/M/NC/DR, CRnD-700

2.1 MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700

The table below shows the device ranges in [MELSEC-

QnU/DC, Q17nD/M/NC/DR, CRnD-700]*10as the controller type.

	Device name*7			Setting range		Device No.
						representation
	Input (X)		X0	to	X3FFF	Hexadecimal
	Output (Y)		Y0	to	Y3FFF
	Internal relay (M)*4*6*11		M0	to	M61439
						Decimal
	Latch relay (L)		L0	to	L32767
	Annunciator (F)		F0	to	F32767
	Link relay (B)*4		B0	to	B9FFFF	Hexadecimal
	Timer*6	Contact (TT)	TT0	to	TT32767
		Coil (TC)	TC0	to	TC32767
device	Counter*6	Contact (CT)	CT0	to	CT32767
		Coil (CC)	CC0	to	CC32767	Decimal
	Special relay	(SM)	SM0	to	SM2255
Bit
	Retentive	Contact (SS)	SS0	to	SS32767
	timer*6	Coil (SC)	SC0	to	SC32767
	Step relay (S)		S0	to	S32767
	Link special relay (SB)		SB0	to	SB7FFF	Hexadecimal
			Specified bit of the
			following word devices
	Word device bit		(Except Timer, Counter,			―
			Retentive timer, Index
			register and Buffer
				memory)

Word device

Device name*7			Setting range		Device No.
					representation
Data register (D)*4*6*11		D0	to	D4910079	Decimal
Special data register (SD)		SD0	to	SD2255
Link register (W)*4		W0	to	W4AEBFF	Hexadecimal
Timer (current value) (TN)*6		TN0	to	TN32767
Counter (current value)		CN0	to	CN32767
(CN)*6					Decimal
Retentive timer		SN0	to	SN32767
(current value) (SN)*6
Link special register (SW)		SW0	to	SW7FFF	Hexadecimal
File register (R)*1*2		R0	to	R32767
Extension	Block	0	to	255
file register	Device	ER0	to	ER32767
(ER)*1
Extension file register		ZR0	to	ZR4849663
(ZR)*1*3*4
					Decimal
Index register (Z)		Z0	to	Z19
Buffer memory
(Intelligent function module)		BM0	to	BM32767
(BM)*5
Buffer memory
(Intelligent function module)		G0	to	G65535
(G)*4*5
Ww*8*9		Ww0	to	Ww1FFF
Wr*8*9		Wr0	to	Wr1FFF
Multiple CPU high speed		U3E010000 to U3E024335
transmission memory (U3E0)
Multiple CPU high speed		U3E110000 to U3E124335			Hexadecimal
transmission memory (U3E1)
Multiple CPU high speed		U3E210000 to U3E224335
transmission memory (U3E2)
Multiple CPU high speed		U3E310000 to U3E324335
transmission memory (U3E3)
Motion device (#)		#0	to	#12287	Decimal
		Converting the above bit
Bit device word*8*12		devices into words			―
		(Except Timer, Counter
		and Retentive timer)

*1 Do not set a file register by GT Designer3 when executing multiple programs with the file of the file register set at [Use the same file name as the program] by the PLC parameter of GX Developer.

Otherwise, read/write at GOT will be erroneous.

*2 Available for file register of block No. switched with the RSET instruction.

*3 Available for file register of block No. of file name switched with the QDRSET instruction.

*4 GOT treats them in units of 32k (32768 points).

*5 Only the intelligent function module on the station connected to GOT can be specified.

Set within the address range of the buffer memory existing in the target intelligent function module.

*6 Do not use local devices set in the MELSEC-Q system. Otherwise, normal monitoring is not performed.

*7 Even though Universal model QCPU processes 64-bit data, the GOT cannot monitor 64-bit data.

*8 This is not supported by GT10.

*9 This cannot be monitored when in GOT multi-drop connection.

*10 For GT14, GT11 and GT10, the controller type is as follows.

•GT14, GT11: MELSEC-QnU/DC, Q17nD/M/NC/DR

•GT10: MELSEC-QnU/DC

*11 For monitoring the internal relay (M) or data register (D) of a C Controller module, configure the settings related to the device functions in the device setting tab of the language controller setting utility.

*12 The device No. must be set in multiples of 16.

2 - 8	2. DEVICE RANGE THAT CAN BE SET
	2.1 MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700