Item | Description | Range | |
Format*3 | Select the communication format. | 1, 2 | |
(Default: 1) | |||
|
| ||
|
|
| |
Monitor Speed | Set the monitor speed of the GOT. | High*1 | |
This setting is not valid in all systems. | Normal | ||
(GT16 only) | |||
(Default: Normal) | Low*2 | ||
|
*1 This is effective when collecting a large data on other than the monitor screen (logging, recipe function, etc.). However, when connecting to Q00J/Q00/Q01CPU, the sequence scan time may be influenced. If you want to avoid the influence on the sequence scan time, do not set "High".
(High performance is hardly affected)
*2 Set this item if you want to avoid the influence on the sequence scan time further than the "Normal" setting when connecting to Q00J/Q00/Q01CPU. However, the monitor speed may be reduced.
*3 Set the format to "1".
(2)
(a)For GT16, GT15, GT14, GT12, GT11
Item | Description | Range | |
| Set this item when change the |
| |
| transmission speed used for |
| |
| communication with the connected | 9600bps, | |
| equipment. | ||
| 19200bps, | ||
Transmission | (Default: 115200bps) | ||
38400bps, | |||
Speed | When the setting exceeds the limit of the | ||
57600bps, | |||
| connected equipment, communication is | ||
| 115200bps | ||
| performed at the fastest transmission | ||
|
| ||
| speed supported by the connected |
| |
| equipment. |
| |
|
|
| |
| Set the number of retries to be |
| |
| performed when a communication |
| |
Retry | timeout occurs. When receiving no | 0 to 5times | |
response after retries, the | |||
|
| ||
| communication times out. |
| |
| (Default: 0time) |
| |
|
|
| |
| Set the time period for a communication |
| |
Timeout Time | to time out. | 3 to 30sec | |
| (Default: 3sec) |
| |
|
|
| |
| Set this item to adjust the transmission |
| |
Delay Time | timing of the communication request | 0 to 300 (ms) | |
from the GOT. | |||
|
| ||
| (Default: 0ms) |
| |
|
|
|
(b) For GT10
Item | Description | Range | |
| Set this item when change the |
| |
| transmission speed used for |
| |
| communication with the connected | 9600bps, | |
| equipment. | ||
| 19200bps, | ||
Transmission | (Default: 115200bps) | ||
38400bps, | |||
Speed | When the setting exceeds the limit of the | ||
57600bps, | |||
| connected equipment, communication is | ||
| 115200bps | ||
| performed at the fastest transmission | ||
|
| ||
| speed supported by the connected |
| |
| equipment. |
| |
|
|
|
(3) QnA/L/Q CPU (GT10)
Item | Description | Range | |
| Set this item when change the transmission |
| |
| speed used for communication with the |
| |
| connected equipment. | 9600bps, | |
Transmission | (Default: 115200bps) | 19200bps, | |
When the setting exceeds the limit of the | 38400bps, | ||
Speed | |||
connected equipment, communication is | 57600bps, | ||
| |||
| performed at the fastest transmission | 115200bps | |
| speed supported by the connected |
| |
| equipment. |
| |
|
|
|
6 - 26 | 6. DIRECT CONNECTION TO CPU |
| 6.4 GOT Side Settings |