(4)
Item | Description | Range | |
| Set this item when change the transmission |
| |
| speed used for communication with the |
| |
| connected equipment. |
| |
Transmission | (Default: 9600bps) |
| |
When the setting exceeds the limit of the | 9600bps | ||
Speed | |||
connected equipment, communication is |
| ||
|
| ||
| performed at the fastest transmission |
| |
| speed supported by the connected |
| |
| equipment. |
| |
|
|
|
(5)
Item | Description | Range | |
| Set this item when change the transmission |
| |
| speed used for communication with the |
| |
| connected equipment. | 9600bps, | |
Transmission | (Default: 115200bps) | 19200bps, | |
When the setting exceeds the limit of the | 38400bps, | ||
Speed | |||
connected equipment, communication is | 57600bps, | ||
| |||
| performed at the fastest transmission | 115200bps | |
| speed supported by the connected |
| |
| equipment. |
| |
|
|
| |
| Set the number of retries to be performed |
| |
Retry | when a communication timeout occurs. |
| |
When receiving no response after retries, | 0 to 5times | ||
| the communication times out. |
| |
| (Default: 3times) |
| |
|
|
| |
| Set the time period for a communication to |
| |
Timeout Time | time out. | 1 to 30sec | |
| (Default: 3sec) |
| |
|
|
| |
| Set this item to adjust the transmission |
| |
Delay Time | timing of the communication request from | 0 to 300 (ms) | |
the GOT. | |||
|
| ||
| (Default: 5ms) |
| |
|
|
|
POINT
(1)Communication interface setting by the Utility The communication interface setting can be changed on the Utility's [Communication Settings] after writing [Communication Settings] of project data.
For details on the Utility, refer to the following manual.
GT
User's Manual
(2)Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
HINT
Cutting the portion of multiple connection of the controller
By setting GOT internal device, GOT can cut the portion of multiple connection of the controller. For example, faulty station that has communication timeout can be cut from the system.
Disconnect the faulty station
For details of the setting contents of GOT internal device, refer to the following manual.
GT Designer3 Version Screen Design Manual (Fundamentals)
1
PREPARATORYFORPROCEDURESMONITORING 2
RANGESETBE
DEVICE CANTHAT 3
RANGEACCESS MONITORINGFOR 4
MONITORTOREDUNTANTSYSTEM HOW 5
CONNECTIONBUS 6
DIRECTTOCONNECTIONCPU 7
LINKCOMPUTER CONNECTION 8
ETHERNETCONNECTION
6. DIRECT CONNECTION TO CPU | 6 - 27 |
6.4 GOT Side Settings