POINT

Utility

(1) How to display Utility (at default)

When using GT16, GT1595, GT14, GT12 or GT1020

Utility call key

1-point press on GOT screen upper-left corner

Utility display

(When using GT16, GT12) (When using GT15)

(When using GT105 ,

When using GT1585, GT157,(When using GT14, GT11) GT104 ) GT156, GT155, GT11, GT105,

GT104 or GT1030

Utility call key

Simultaneous 2-point press

(When using GT1030,GT1020)

(2)Utility call

When setting [Pressing time] to other than 0 second on the setting screen of the utility call key, press and hold the utility call key until the buzzer sounds.For the setting of the utility call key, refer to the following.

GT User's Manual

(3)Communication interface setting by the Utility

The communication interface setting can be changed on the Utility's [Communication setting] after writing [Communication Settings] of project data.

For details on the Utility, refer to the following manual.

GT User's Manual

(4)Precedence in communication settings

When settings are made by GT Designer3 or the Utility, the latest setting is effective.

1 - 38

1. PREPARATORY PROCEDURES FOR MONITORING

 

1.5 Verifying GOT Recognizes Connected Equipment