The [Communication Setting] appears.
For GT15, GT14 or GT11
1.
2.
3.4.
1. After powering up the GOT, touch [Main Menu] 
[Communication setting] from the Utility.
2. Touch [Communication setting].
(The screen on the left is not displayed on GT11.)
3.
4. Verify that the communication driver name to be used is displayed in the box for the communication interface to be used.
5. When the communication driver name is not displayed normally, carry out the following procedure again.
1 - 36 | 1. PREPARATORY PROCEDURES FOR MONITORING |
| 1.5 Verifying GOT Recognizes Connected Equipment |