Mitsubishi Electronics GOT1000 10.3.4Switch setting (Only when MELSECNET/10 communication unit is used)

10.3.4Switch setting (Only when MELSECNET/10 communication unit is used)

POINT

Switch setting of the communication unit

When using the MELSECNET/H communication unit, the switch setting is not needed.

For details of each setting switch and LED, refer to the following manual.

GT15 MELSECNET/10 communication unit User's Manual

							GT15-75J71LP23-Z, GT15-75J71BR13-Z
					RUN	POWER
					PC
					DUAL	D.LINK
					SW.E	T.PASS
					M/S.E					E
				E PRM.E		GOT R/W
				R	CRC	CRC				R
				R	OVER	OVER				R
				O	AB.IF	AB.IF				O
				R						R
					TIME	TIME
					DATA	DATA
					UNDER	UNDER
					LOOP	LOOP
					SD	SD
					RD	RD
					F.LOOP	R.LOOP
												4	5	6			(2)
												1	0	9
												3		7	GROUP No.
												2		8
(4)								7	8	9A		1	5	6
							21		0FED				0	9 8
							6			B		4		7
						MODE	45			C		3			X100
							3					2
							4		5	6		4	5	6		No.	(1)
							1		0	9 8		1	0	9 8
(3)							3			7	X10	3		7	X10 NETWORK
							2					2
						No.	4		5	6		4	5	6
					STATION
							3			7	X1	3		7	X1
							2			8		2		8
							1		0	9		1	0	9
(1) Network number setting switch
Network number setting																Description		Set value
				switch
4	5	6
3			7		X100
2			8
1	0	9
																Set the network No. of
	5	6
4																the MELSECNET/10
3			7		X10		NETWORK											1 to 239
2			8													communication unit.
1	0	9					No.
																(Default: 001)
	5
4		6
3			7		X1
2			8
1	0	9
(2) Group number setting switch
Group number setting																Description		Set value
				switch
			5	6												Set the group No. of the		0:
	4															MELSECNET/10
	3				7													No group
2					8 GROUP No.											communication unit.
		1	0	9														setting (fixed)*1
																(Default: 0)
			*1 The GOT does not use the group number.
						Specify "0".

(3) Station number setting switch

Station number setting					Description	Set value
	switch
4		5	6		Set the station No. of the
3			7	X10	MELSECNET/10	1 to 64: GT15-
			8
	2
	1		9		communication unit.	75J71LP23-Z
STATION		0
			6		Set to not duplicate other	1 to 32: GT15-
No.	4	5
	2		8	X1	stations in the network.	75J71BR13-Z
	3		7
1		0	9		(Default: 01)

(4) Mode setting switch

Mode setting switch							Description	Set value
	56	7	8	9			On-line
					B
				A				0
MODE	4					C	(Default: 0)
	3				E
	2					D
		1	0	F

POINT

(1) Switch setting example

For the switch setting example, refer to the following.

10.4 PLC Side Setting

(2) When the switch setting is changed

When changing the switch setting after mounting the MELSECNET/10 communication unit to the GOT, reset the GOT.

(3) Self check test

Select "6" to "9" as the mode setting switch to provide a self check test of the MELSECNET/10 communication unit.

For details, refer to the following manual.

GT15 MELSECNET/10 communication unit User's Manual

9

TO CONNECTIONPLC MELSECNET/H(PLCNETWORK)

10

MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)

11

CC-Link IE CONTROLLER NETWORK CONNECTION

12

CC-Link IE FIELD NETWORK CONNECTION

13

CC-Link CONNECTION (INTELLIGENT DEVICE STATION)

14

CC-Link CONNECTION (Via G4)

15

CONNECTION

INVERTER

16

CONNECTION

SERVO AMPLIFIER

10. MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)	10 - 11
10.3 GOT Side Settings