Mitsubishi Electronics GOT1000 19.6 Setting of Serial Multi-DropConnection Unit, 19.6.1Write the OS, 19.6.2Setting communication interface (Communication settings)

19.6 Setting of Serial Multi-Drop Connection Unit

19.6.1Write the OS

Write the standard monitor OS and communication driver according to the desired connection type onto the serial multi-drop connection unit.

For the OS writing methods, refer to the following manual.

GT Designer3 Version Screen design manual

1.

Click!

1. Check-mark a communication driver according to the desired connection type and click the [Write] button.

19.6.2Setting communication interface (Communication settings)

Make the Serial Multi-Drop Connection Unit interface setting on [Communication with GT01-RS4-M] of GT Designer 3.

For the communication interface driver, set the same communication driver as the serial multi-drop connection.

For details on [Communication with GT01-RS4-M] of GT Designer3, refer to the manuals.

GT Designer3 Version Screen design manual

19 - 24	19. GOT MULTI-DROP CONNECTION
	19.6 Setting of Serial Multi-Drop Connection Unit