Mitsubishi Electronics GOT1000 4.3 CC-LinkConnection (Intelligent Device Station)

4.3 CC-Link Connection (Intelligent Device Station)

This section describes the CC-Link connection (intelligent device station) that connects the GOT set as the intelligent device station to the CC-Link network.

The following shows an example of connecting the GOT set as the intelligent device station to the CC-Link network.

Network No. 0, Station No. 0 (Master station)

Monitor target

	Power modulesupply	Q25PRHCPU	25-QJ71LP21	QJ71BR11	100-QJ71E71
Control
system
(System A)

CC-Link connection

Network No. 0, Station No. 1

CC-Link

(Standby master station)

GOT

Network No. 0,

QJ61BT11N

Empty

Power modulesupply

Q25PRHCPU

25-QJ71LP21

QJ71BR11

100-QJ71E71

QJ61BT11N

Empty

(System B)

Station No. 2

(Intelligent device station)

Standby system

MELSECNET/H remote I/O network

module supply Power 25-QJ72LP25 QJ71C24N Empty Empty

(1) Connection method

Connect the CC-Link network system to the GOT. For details, refer to the following.

13. CC-Link CONNECTION (INTELLIGENT DEVICE STATION)

(2) GT Designer3 setting

Set GT Designer3 as follows.

Setting item		Settings	Model
Controller Type		MELSEC-QnA/Q/QS, MELDAS C6*
Device setting	Master station	Other (NW No. 0, Station No. 0 (master station))
(Network setting)
Q Redundant Setting		Do not set the item.

As the monitoring method, "monitoring by transient transmission" and "monitoring by cyclic transmission" are available. Each monitor method has advantages and disadvantages.

For details, refer to the following.

3.3CC-Link System Access Range for Monitoring

4 - 18	4. HOW TO MONITOR REDUNTANT SYSTEM
	4.3 CC-Link Connection (Intelligent Device Station)