By clicking [Set], the [GOT (Ethernet) transparent setting] is displayed.
Here, set the built-in Ethernet port QCPU or Ethernet module, which is firstly connected via a GOT.
Set [QnUDE(H)] or [QJ71E71] for [Type name]. When connecting the Q173NCCPU, set [QJ71E71].
Double-click [PLC module] of the PLC side I/F to display [PLC side I/F Detailed setting of PLC module].

When connecting the GOT and PLC in Ethernet communication

(when connecting to QCPU (Q mode))

1. Click [Online] [Transfer Setup] in GX Developer.

2. The [Transfer Setup] is displayed.

3. Set the [Transfer Setup]:

PC side I/F

: Serial USB (COM)

PLC side I/F

: PLC module

Other station

: No specification

4. Double-click [Serial] of the PC side I/F to display [PC side I/F Serial setting].

5. Check-mark either of the following in [PC side I/F Serial setting].

When connecting the GOT and PC with serial

Mark the [RS-232C] checkbox.

When connecting the GOT and PC with USB

Mark the [USB] checkbox.

6.

7. On the [PLC side I/F Detailed setting of PLC module], mark the [via GOT(Ethernet) transparent mode] checkbox and click [Set].

8.

9.

10.Specify the number for [Network No.] and [Station No.] same as the number assigned to the Ethernet module.

When [QnUDE(H)] is set for [Type name], the setting is not required.

11.Specify the IP address for [IP address] same as the IP address assigned to the built-in Ethernet port QCPU or Ethernet module.

17

ROBOT CONTROLLER CONNECTION

18

CNC CONNECTION

19

CONNECTION

GOT MULTI-DROP

20

MULTIPLE-GT14, GT12, GT11, GT10 CONNECTION FUNCTION

21

FUNCTION

MULTI-CHANNEL

22

FUNCTION

FA TRANSPARENT

22. FA TRANSPARENT FUNCTION

22 - 41

22.6 Personal Computer Side Setting