(b) Example of GX Developer setting

For details of the parameter setting, refer to the following.

C6/C64/C64T NETWORK INSTRUCTION MANUAL BNP-B2373

POINT

IP address setting

IP address setting on GX Developer is invalid.

Set the IP address by the 7-segment LED and rotary switch of the CNC side, referring to the next page.

(2)CNC side parameter setting

Confirm the CNC side parameter setting with the settings of IP address, gateway address, subnet mask and port No. by the 7-segment LED and rotary switch of the CNC side.

For details of the parameter setting operation, refer to the following.

C6/C64/C64T NETWORK INSTRUCTION

MANUAL BNP-B2373 IV Setting the Ethernet

IP Address

7-segment LED

Rotary switch

18 - 22

18. CNC CONNECTION

 

18.5 CNC Side Settings