Mitsubishi Electronics GOT1000 manual 477

RS422 connection diagram 12) (For GT1030, GT1020)

GOT side*2	FR-A5NR side	FR-A5NR side	FR-A5NR side
	(terminal block)	(terminal block)	(terminal block)
(terminal block)	Station No.0	Station No.1	Station No.n
SDA	RDA	RDA	RDA
	RDB	RDB	RDB
SDB
	SDA	SDA	SDA
RDA
	SDB	SDB	SDB
RDB
	SG	SG	SG
SG
	RDR	RDR	RDR
RSA
			*1
RSB
CSA
CSB

*1 Connect a terminating resistor jumper to RDB and RDR which are assigned in the FR-A5NR of the inverter located farthest from the GOT.

The terminating resister jumper is packed together with the FR-A5NR.

*2 Set the terminating resistor of GOT side, which will be a terminal, to "330 ".

	1.4.3 Terminating resistors of GOT
RS422 connection diagram 13)
(For GT1030, GT1020)
GOT side*1	Inverter side
	RS485 terminal block
(terminal block)	(built into the inverter)
SDA		RDA1(RXD1+)
SDB		RDB1(RXD1-)
RDA		SDA1(TXD1+)
RDB		SDB1(TXD1-)
SG		SG(GND)

RSA

RSB

CSA

CSB

*1 Set the terminating resistor of the GOT side to "330". 1.4.3 Terminating resistors of GOT

9

TO CONNECTIONPLC MELSECNET/H(PLCNETWORK)

10

MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)

11

CC-Link IE CONTROLLER NETWORK CONNECTION

12

CC-Link IE FIELD NETWORK CONNECTION

13

CC-Link CONNECTION (INTELLIGENT DEVICE STATION)

14

CC-Link CONNECTION (Via G4)

15

CONNECTION

INVERTER

16

CONNECTION

SERVO AMPLIFIER

15. INVERTER CONNECTION	15 - 25
15.3 Connection Diagram