[Controller Setting] and [Ethernet] of GT Designer3
(1) Controller setting
Item | Setting (Use default value.) | |
GOT NET No. | 1 | |
|
| |
GOT PLC No. | 1 | |
|
| |
GOT IP Address | 192.168.0.18 | |
|
| |
GOT Port No. | 5019 | |
(Communication) | ||
| ||
|
| |
GOT Port No. | 5014 | |
(Ethernet Download) | ||
| ||
|
| |
Default Gateway | 0.0.0.0 | |
|
| |
Subnet Mask | 255.255.255.0 | |
|
| |
Retry | 3times | |
|
| |
Startup Time | 3sec | |
|
| |
Timeout Time | 3sec | |
|
| |
Delay Time | 0ms | |
|
|
(2) Ethernet setting
| Item |
| Setting |
| Host |
| * |
|
|
|
|
| N/W No. |
| 1 |
|
|
|
|
| PLC No. |
| 2 |
Ethernet |
|
|
|
Type |
| FX (fixed) | |
setting No.1 |
| ||
|
|
| |
IP address |
| 192.168.0.19*1 | |
|
| ||
| Port No. |
| 5551*2 |
| Communication |
| TCP (fixed) |
|
|
| |
*1 | Set the value according to the IP address of the connected | ||
| PLC. |
| |
*2 | Set the value according to the Port No. of the connected | ||
| PLC. |
| |
| For details, refer to the following. | ||
|
| ||
|
| ||
POINT
[Controller Setting] and [Ethernet] of GT Designer3
For [Controller Setting] and [Ethernet] of GT Designer3, refer to the following.
8.3.1 Setting communication interface (Communication settings)
Confirming the communication state of Ethernet module
(1)When using the Command Prompt of Windows®. Execute a Ping command at the Command Prompt of Windows®.
(a)When normal communication C:\>Ping 192.168.0.19
Reply from 192.168.0.19: bytes=32 time<1ms TTL=64
(b)When abnormal communication C:\>Ping 192.168.0.19 Request timed out.
(2)When abnormal communication
At abnormal communication, check the followings and execute the Ping command again.
• Mounting condition of Ethernet communication unit
• Cable connecting condition
• Confirmation of switch and network parameter setting
• Operation state of PLC CPU (faulty or not)
• IP address of GOT specified by Ping command
POINT
Ethernet diagnostics of FX
Ethernet diagnostics of FX
For details of Ethernet diagnostics of FX Configurator- EN, refer to the following manual.
FX
1
PREPARATORYFORPROCEDURESMONITORING 2
RANGESETBE
DEVICE CANTHAT 3
RANGEACCESS MONITORINGFOR 4
MONITORTOREDUNTANTSYSTEM HOW 5
CONNECTIONBUS 6
DIRECTTOCONNECTIONCPU 7
LINKCOMPUTER CONNECTION 8
ETHERNETCONNECTION
8. ETHERNET CONNECTION | 8 - 41 |
8.4 PLC Side Setting |
|