Mitsubishi Electronics GOT1000 5.3 GOT Side Settings, 5.3.2Communication detail settings, 5.3.1 Setting communication interface (Communication settings)

5. BUS CONNECTION

5.3 GOT Side Settings

5 - 30

BUS (Q) BUS (A/QnA)

4. The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.

Make the settings according to the usage environment.

5.3.2 Communication detail settings Click the [OK] button when settings are completed.

POINT

The settings of connecting equipment can be confirmed in [I/F Communication Setting]. For details, refer to the following.

1.1.2 I/F communication setting

The Controller Setting window is displayed. Select the channel to be used from the list menu.

Select [Common] menu.

[Controller Setting] from the

1.

2.

3. Set the following items.

• Manufacturer: Mitsubishi

• Controller Type: Set the option according to the Controller Type to be connected.

• I/F: Interface to be used

• Driver: Set either of the following option according to the Controller Type to be connected.

5.3 GOT Side Settings

5.3.1 Setting communication interface (Communication settings)

Set the channel of the connected equipment.

2.

3.

4.

Click!

5.3.2Communication detail settings

(1)Bus(Q)

Item	Description	Range
Number of	(Default: 1)	1 to 7
Stages
Slot No.	(Default: 0)	0 to 9
	Set the monitor speed of the GOT.	High*1/Normal/
Monitor Speed	This setting is not valid in all systems.
		Low*2
	(Default: Normal)
Timeout Time	Set the time period for a
	communication to time out.	12 to 90
(Sec.)
	(Default: 12)

*1 This range is effective when collecting a large amount of data (such as logging and recipe function) on other than the monitor screen.

However, the range may affect the sequence scan time when connecting to Q00UJ/Q00U/Q01U/Q02UCPU or Q00J/ Q00/Q01CPU.

If you want to avoid the influence on the sequence scan time, do not set [High].

(This setting hardly affects QCPUs other than the above.)

*2 Set this range if you want to avoid the influence on the sequence scan time further than the [Normal] setting when connecting to Q00UJ/Q00U/Q01U/Q02UCPU or Q00J/Q00/ Q01CPU.

However, the monitor speed may be reduced.

(2) Bus(A/QnA)

Item	Description	Range
Number of	(Default: 1)	1 to 7
Stages
Slot No.	(Default: 0)	0 to 7
Timeout Time	Set the time period for a
	communication to time out.	3 to 90
(Sec.)
	(Default: 3)