Item | Description | Range | |
| Set the monitor speed for the CC- |
| |
Monitor | Link IE controller network. |
| |
This setting is not valid in all | High*2/Normal/Low*3 | ||
Speed | |||
systems. |
| ||
|
| ||
| (Default: High) |
| |
*1 | For details, refer to the following manual. | ||
| |||
| |||
*2 This range is effective when collecting a large amount of data (such as logging and recipe function) on other than the monitor screen.
However, the range may affect the sequence scan time when connecting to Q00UJ/Q00U/Q01U/Q02UCPU or Q00J/ Q00/Q01CPU.
If you want to avoid the influence on the sequence scan time, do not set [High].
(This setting hardly affects QCPUs other than the above.)
*3 Set this range if you want to avoid the influence on the sequence scan time further than the [Normal] setting when connecting to Q00UJ/Q00U/Q01U/Q02UCPU or Q00J/Q00/ Q01CPU.
However, the monitor speed may be reduced.
*4 When the
POINT
(1)Switch setting example
For the switch setting example, refer to the following.
(2)Communication interface setting by Utility The communication interface setting can be changed on the Utility's [Communication Settings] after writing [Communication Settings] of project data.
For details on the Utility, refer to the following manual.
GT
User’s Manual
(3)Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
(4)Network type
Be sure to set the same network types for the CPU side and the GOT side. If the net work types of the CPU side and the GOT side are different, an error is displayed in the system alarm of the GOT side.
11.3.3Routing parameter settingUp to 64 [Transfer Network No.]s can be set.
However, the same transfer network number cannot be set twice or more (multiple times).
Therefore, the one that can access to other station from the request source host GOT is 64 kinds of [Transfer Network No.]s.
POINT
Routing parameter setting
When communicating within the host network, routing parameter setting is unnecessary.
For details of routing parameters, refer to the following manual.
| Item | Range | |
Transfer Network No. | 1 to 239 | ||
|
| ||
Relay Network No. | 1 to 239 | ||
|
|
| |
Relay Station | Universal model QCPU | 1 to 120 | |
|
| ||
QCPU other than Universal model |
| ||
No. | 1 to 64 | ||
QCPU*1 | |||
|
| ||
*1 Basic model QCPU and the QSCPU are not included.
POINT
(1)Routing parameter setting of relay station Routing parameter setting is also necessary for the relay station.
For the setting, refer to the following.
(2)Parameter reflection function of MELSOFT Navigator
(a)The color of the cells for the items which are reflected to GT Designer3 from MELSOFT Navigator changes to green. Set items, which are displayed in green cells, from the MELSOFT Navigator.
(b)When the settings of Transfer network No., Relay network No. or Relay station No. are reflected to the parameter from the MELSOFT Navigator, those settings are added. Items set in advance are not deleted.However, if the target network No. overlaps, the item set in advance is overwritten.
(c)The routing information is used manually by the user when the data is created. Therefore, after changing the network configuration by MELSOFT Navigator, create a routing information again. For details of the creation of the routing information, refer to the MELSOFT Navigator help.
9
TO CONNECTIONPLC MELSECNET/H(PLCNETWORK)
10
MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)
11
12
13
14
15
CONNECTION
INVERTER
16
CONNECTION
SERVO AMPLIFIER
11. | 11 - 9 |
11.3 GOT side settings