22.6.2Accessing by GX Works2

The following shows the procedure to set the FA transparent function of GX Works2.

When connecting the GOT and personal computer with serial or USB

(1)Connecting the GOT and PLC in bus connection or direct CPU connection (when connecting to QCPU (Q mode))

1.

Click the Connection Destination view

 

[Connection Destination]

[(Connection target data

 

name)] in the Navigation window of GX Works2.

2.

The [Transfer Setup Connection1] is displayed.

3.

Set the [Transfer Setup Connection1]:

 

PC side I/F

: Serial USB

 

PLC side I/F

: GOT

 

Other Station Setting

: No Specification:

4. Double-click [Serial USB] of the PC side I/F to display [PC side I/F Serial Setting].

5. Check-mark either of the following in [PC side I/F Serial Setting].

When connecting the GOT and PC with serial When connecting the GOT to PC via modem

Mark the [RS-232C] checkbox.

When connecting the GOT and PC with USB

Mark the [USB] checkbox.

(For bus connection)

6. Double-click [GOT] of the PLC side I/F to display [PLC side I/F Detailed Setting of GOT].

7. Check-mark either of the following in [PLC side I/F Detailed Setting of GOT].

Bus connection

[via GOT(Bus) transparent mode]

Direct CPU connection

Mark the [via GOT(direct coupled) transparent mode] checkbox.

8. The screen returns to [Transfer Setup Connection1]. Click [Connection Test] to check if GX Works2 has been connected to the QCPU (Q mode).

17

ROBOT CONTROLLER CONNECTION

18

CNC CONNECTION

19

CONNECTION

GOT MULTI-DROP

20

MULTIPLE-GT14, GT12, GT11, GT10 CONNECTION FUNCTION

21

FUNCTION

MULTI-CHANNEL

22

FUNCTION

FA TRANSPARENT

22. FA TRANSPARENT FUNCTION

22 - 43

22.6 Personal Computer Side Setting