(d) Example of sequence program
Parameter setting
Module error | Module |
| ready |
Number of connected modules (1 module)
Number of retry (3 times)
Number of automatic return stations (1 station)
Operation specification in the case of CPU failure (Stop)
Reserved station specification (No specification)
Error invalid station specification (No specification)
Station data (Intelligent device station, exclusive station 1, station No.1)
Refresh insruction
Refresh insruction
Turn on only during 1 scan after RUN
Data link with buffer memory parameter
Module error | Module |
| ready |
Data link start up request (buffer memory address)
Data link startup normal completion (buffer memory)
Error code reading (SW0068)
Data link startup abnormal completion (buffer memory)
POINT
When changing the sequence program
After writing the sequence program to the PLC CPU, operate the PLC CPU ether turning OFF and then ON or resetting.
13 - 30 | 13. |
| 13.4 PLC Side Setting |