Mitsubishi Electronics GOT1000 215

	Refer to	PREPARATORY PROCEDURES FOR MONITORING
	6.2.2

		2
	6.2.1	DEVICERANGE THATCAN BE SET
	6.2.3	DEVICERANGE THATCAN BE SET
	6.2.3
		3
	6.2.3	RANGEACCESS MONITORINGFOR
	6.2.3
		4
		HOW TO MONITOR REDUNTANT SYSTEM
		5
	6.2.4	BUS CONNECTION
		BUS CONNECTION
		6
		DIRECT CONNECTION TO CPU
	6.2.4	7
	6.2.4

(Continued to next page)

*1 When connecting in direct CPU connection, the adapter L6ADP-R2 is required.

*2 When monitoring AnNCPU or A2SCPU, only the following or later software version is used to write to the CPU.

•AnNCPU(S1) with link: Version L or later, AnNCPU(S1) without link: Version H or later

•A2SCPU: Version H or later

*3 GT10 can be connected to CPUs of the following HW versions or later.

6. DIRECT CONNECTION TO CPU	6 - 3
6.1 Connectable Model List