Mitsubishi Electronics GOT1000 16.6 Device Range that Can Be Set

Click the [Search] button.

Select and input a key item for searching.

2.

3.

4. The items that matches to the specified condition are displayed.

The display contents are as follows.

Select a key item for searching.

Function Name Search: Select this item when searching a device with the function name.

Text Search: Select this item when searching a device with the character string.

The device can be searched with the servo definition or other items on this dialog box to set a device.

6.

4. 5.

5.

6.

1.

16.6 Device Range that Can Be Set

9

The device ranges of controller that can be used for GOT are as follows.

Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.

The device specifications of controllers may differ depending on the models, even though belonging to the same series.

Please make the setting according to the specifications of the controller actually used.

When a non-existent device or a device number outside the range is set, other objects with correct device settings may not be monitored.

(1) Servo amplifier

(a)Device Definition dialog box

When setting a device on the Device dialog box and click the [Device Definition...] button, the correspondence between the GOT virtual device for a servo amplifier and the definition of the servo amplifier is displayed.

1. 2. 3. 3.

TO CONNECTIONPLC MELSECNET/H(PLCNETWORK)

10

MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)

11

CC-Link IE CONTROLLER NETWORK CONNECTION

12

Item	Description
	Set the device name, device number, and bit number.
	The bit number can be set only when specifying the bit of word device.
	Clicking the button displays the dialog box indicating
Device	the correspondence between the GOT virtual device
	for a servo amplifier and the definition of servo
	amplifier.
	If selecting an item on the displayed dialog box,
	remember that the servo amplifier definition is
	displayed in the text box below.

Informat Displays the device type and setting range which are selected in

ion [Device].

Set the monitor target of the set device.

		Select this item when writing data to all servo
		amplifiers connected.
		During a monitoring, the servo amplifier of Station
	All	No. 0 is monitored.
		When inputting data by Numerical Input, the data is
		written to all servo amplifiers connected during
		inputting; the servo amplifier of Station No. 0 is
		monitored during other than inputting (displaying).
Network
		Select this item when monitoring the servo amplifier
		of the Station No. specified.
		After selecting, set station numbers of servo
		amplifiers in the following range.
	Selection	0 to 31:
		The servo amplifier of the Station No. specified will
		be monitored.
		100 to 115:
		Specify the Station No. of the servo amplifier to be
		monitored with a GOT data register (GD).*1
	For details of *1, refer to the following.
	Station No.	GOT data register (GD)	Setting range
	100	GD10	0 to 31
101		GD11
			(If setting a value out
	:	:
			of the range above, a
114		GD24
			timeout error occurs.)
	115	GD25

Device : The GOT virtual device for a servo amplifier is displayed.

Definition : The definition of the servo amplifier is displayed.

Symbol : The abbreviated name for the servo amplifier is displayed.

Select a device to be set.

Clicking the [OK] button reflects the device selected by step 4 to the Device dialog box.

POINT

When selecting [All] in the Network setting

The network No. 0 and Station No. FF are displayed on Device List and when printing.

(Device List screen)

CC-Link IE FIELD NETWORK CONNECTION

13

CC-Link CONNECTION (INTELLIGENT DEVICE STATION)

14

CC-Link CONNECTION (Via G4)

15

CONNECTION

INVERTER

16

CONNECTION

SERVO AMPLIFIER

16. SERVO AMPLIFIER CONNECTION 16 - 17

16.6 Device Range that Can Be Set