22.FA TRANSPARENT FUNCTION

22.1FA Transparent Function

The FA transparent function allows the sequence programs of the Mitsubishi PLC to be read, written and monitored from a personal computer connected via a GOT.

A 1254 A 1254

B 348 B 348

Bus connection cable RS-232/RS-422 cable Ethernet connection cable

RS-232 cable USB cable

Ethernet connection cable

Sequence program can be read, written, monitored, etc.

22.2 Compatible Software

The following shows the software compatible with the FA transparent function.

POINT

(1)The range accessible by software when FA transparent function is used

Use of the FA transparent function does not affect the range accessible by the software. For details on accessible range, refer to the manual for the respective software.

(2)The software settings when using FA transparent function

For the software settings, refer to the following when using FA transparent function.

22.6.1 Accessing the PLC by the GX Developer, PX Developer, GX Configurator 22.6.2 Accessing by GX Works2

22.6.3 Accessing by GX LogViewer

22.6.4 Accessing PLC by GX Configurator-QP 22.6.5 Accessing by the MT Developer 22.6.6 Accessing by the MT Works2

22.6.7 Accessing the servo amplifier by the MR Configurator 22.6.8 Accessing the servo amplifier by the MR Configurator2 22.6.9 Accessing the inverter by the FR Configurator 22.6.10 Accessing PLC by FX Configurator-FP

22.6.11 Accessing by FX Configurator-EN 22.6.12 Accessing by RT ToolBox2 22.6.13 Accessing by NC Configurator 22.6.14 Accessing by MELSOFT Navigator

22.6.15 Accessing by LCPU Logging Configuration Tool

22.6.16 Accessing by Setting/ Monitoring tool for C Controller module

22 - 2

22. FA TRANSPARENT FUNCTION

 

22.1 FA Transparent Function