1.6.2Confirming the communication state on the GOT side (For Ethernet connection)
Confirming the communication state on Windows®, GT Designer3
(1)When using the Command Prompt of Windows®
Execute a Ping command at the Command Prompt of Windows®.
(a)When normal communication C:\>Ping 192.168.0.18
Reply from 192.168.0.18: bytes=32time<1ms TTL=64
(b)When abnormal communication C:\>Ping 192.168.0.18 Request timed out.
(2)When using the [PING Test] of GT Designer3
Select [Communication] 
[Communication configuration] 
[Ethernet] and 
[Connection Test] to display [PING Test].
1.Specify the [GOT IP Address] of the [PING Test] and click the [PING Test] button.
2.The [Test Result] is displayed after the [PING Test] is finished.
2.
Click!
1.
(3)When abnormal communication
At abnormal communication, check the followings and execute the Ping command again.
•Mounting condition of Ethernet communication unit
•Cable connecting condition
•Confirmation of [Communication Settings]
•IP address of GOT specified by Ping command
POINT
Ethernet diagnostics of GX Developer
Ethernet diagnostics of GX Developer is available to a Ping test from the PLC.
For details of Ethernet diagnostics of GX Developer, refer to the following manual.
User's manual of the Ethernet module
1
PREPARATORYFORPROCEDURESMONITORING 2
RANGESETBE
DEVICE CANTHAT 3
RANGEACCESS MONITORINGFOR 4
MONITORTOREDUNTANTSYSTEM HOW 5
CONNECTIONBUS 6
DIRECTTOCONNECTIONCPU 7
LINKCOMPUTER CONNECTION 8
ETHERNETCONNECTION
1. PREPARATORY PROCEDURES FOR MONITORING | 1 - 45 |
1.6 Checking for Normal Monitoring |
|