Mitsubishi Electronics GOT1000 manual 93

Setting item

When selecting buffer memory (G) with the following controllers

MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700

MELSEC-L

MELSEC-QnA/Q/QS, MELDAS C6 *

MELSEC-Q(MULTI)/Q MOTION

(For MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700)

(For MELSEC-FX)

	Item				Description
		Set the device name, device number, and bit number.
		The bit number can be set only by specifying the bit of word device.
		When setting buffer memory (BM) and (G), set the buffer memory address in the space for the device number.
				Reading the device comment data created by GX Developer and confirming the device
				comment/device name are available during device setting.
				For details on the procedure to refer to the device comment, refer to the following.
					GT Designer3 Version Screen Design Manual
		Block		Set the block number of the extended file register.
				This item can be set only when the extended file register (ER) is selected.
				Set when the buffer memory (BM) is selected.
Device		Intelligent	Unit top I/O	Set the head I/O number of the buffer memory for the intelligent function module.
				Set the first 2 digits of the 3-digit head I/O number.
		function
				Set when the buffer memory (G) is selected.
		module
			Unit No.	Set the head I/O number of the buffer memory for the intelligent function module.
				Set the first 2 digits of the 3-digit head I/O number.
				Set for using the buffer memory of MELSEC-FX series.
			Mask type	Set the mask type for monitoring or writing only specified bits of the buffer memory.
		MELSEC-			(4) Setting of the mask type (MELSEC-FX)
		FX buffer
				Set for using the buffer memory of MELSEC-FX series.
		memory
				Set the module No. of the special function unit or special function block to monitor or write.
			Unit No.

(5) Setting of the module No. (MELSEC-FX)

Information	Displays the device type and its setting range selected in [Device].
	Set the station number of the controller to be monitored.
	CPU No.	Set the CPU No. of the controller.
			(1) Setting of the CPU No.
Network	Host	Select this item for monitoring the host controller.
		Select this for monitoring other controllers.
		After selecting the item, set the station number and network number of the controller to be
	Other	monitored.
			NW No.: Set the network No.
			Station No.: Set the station No.
			2. DEVICE RANGE THAT CAN BE SET	2 - 3

1

PREPARATORYFORPROCEDURESMONITORING 2

RANGESETBE

DEVICE CANTHAT 3

RANGEACCESS MONITORINGFOR 4

MONITORTOREDUNTANTSYSTEM HOW 5

CONNECTIONBUS 6

DIRECTTOCONNECTIONCPU 7

LINKCOMPUTER CONNECTION 8

ETHERNETCONNECTION