POINT

[Controller Setting] and [Ethernet] of GT Designer3

For [Controller Setting] and [Ethernet] of GT Designer3, refer to the following.

17.3.1 Setting communication interface (Communication settings)

Confirming communication state of CRnD- 700

(1)When using the Command Prompt of Windows®. Execute a Ping command at the Command Prompt of Windows®.

(a)When normal communication C:\>Ping 192.168.0.19

Reply from 192.168.0.19: bytes=32 time<1ms TTL=64

(b)When abnormal communication C:\>Ping 192.168.0.19 Request timed out.

(2)When abnormal communication

At abnormal communication, check the followings and execute the Ping command again.

• Cable connecting condition

• Parameter settings

• Operation state of the CRnD-700. (faulty or not)

• The IP address of the CRnD-700 specified for the Ping command.

17

ROBOT CONTROLLER CONNECTION

18

CNC CONNECTION

19

CONNECTION

GOT MULTI-DROP

20

MULTIPLE-GT14, GT12, GT11, GT10 CONNECTION FUNCTION

21

FUNCTION

MULTI-CHANNEL

22

FUNCTION

FA TRANSPARENT

17. ROBOT CONTROLLER CONNECTION

17 - 7

17.4 PLC Side Settings