1.2 Writing the Project Data and OS onto the GOT

Write the standard monitor OS, communication driver, option OS, project data and communication settings onto the GOT. For details on writing to GOT, refer to the following manual.

GT Designer3 Version Screen Design Manual

1.2.1Writing the project data and OS onto the GOT

1. Select [Communication] [Write to GOT…] from the menu.

2. The [Communication configuration] dialog box appears.

Set the communication setting between the GOT and the personal computer. Click the [OK] button when settings are completed.

3. The [GOT Write] tab appears on the [Communicate with GOT] dialog box. Select the [Project data, OS] radio button of the Write Data.

4. Check-mark a desired standard monitor OS, communication driver, option OS, extended function OS, and Communication Settings and click the [GOT Write] button.

POINT

Writing communication driver onto GT10

When writing a communication driver onto the GT10 in which a Boot OS Ver. under F or a standard monitor OS Ver. under 01.08.00 is written, turn on the GOT in the OS transfer mode.

For details, refer to the following manual. GT10 User's Manual

(Operating of transmission mode)

Turn on the GOT while the bottom right corner is touched.

1. PREPARATORY PROCEDURES FOR MONITORING

1 - 15

1

PREPARATORYFORPROCEDURESMONITORING 2

RANGESETBE

DEVICE CANTHAT 3

RANGEACCESS MONITORINGFOR 4

MONITORTOREDUNTANTSYSTEM HOW 5

CONNECTIONBUS 6

DIRECTTOCONNECTIONCPU 7

LINKCOMPUTER CONNECTION 8

ETHERNETCONNECTION

1.2 Writing the Project Data and OS onto the GOT