(b)Monitoring PLC CPU devices of other stations Set the device name and device No.

2. DEVICE RANGE THAT CAN BE SET

(3)Setting NW No. and station number

(a)When monitoring devices RX, RY, RWw and RWr that are allocated to the master station by CC-Link parameter setting

NW No.: 0, PLC station number: Local

(b)When monitoring PLC CPU devices of another station NW No. 0, PLC station number: Other (Station number: n)

(n: Station number of another station to be monitored (0: Master station, 1-64: Local station))

POINT

For monitoring devices RX, RY, RWw and RWr that are allocated by CC-Link parameter, use the local device even if designating devices allocated to another station.

Otherwise, the display speed will be reduced.

When using CC-Link connection (via G4) (Q series only)

(1)Access range

GT16, GT15 and GT14 can monitor the master station and local stations. GT10 and GT11 can monitor the master station only.

(2)Setting NW No. and station number

(a)When monitoring master station

NW No.: 0, PLC station number: Host/other (station number: 0)

(b)When monitoring local station

NW No.: 0, PLC station number: Other (station number: 1 to 64)

(3)Setting device name and device number Set the device name and device No.

2. DEVICE RANGE THAT CAN BE SET

1

PREPARATORYFORPROCEDURESMONITORING 2

RANGESETBE

DEVICE CANTHAT 3

RANGEACCESS MONITORINGFOR 4

MONITORTOREDUNTANTSYSTEM HOW 5

CONNECTIONBUS 6

DIRECTTOCONNECTIONCPU 7

LINKCOMPUTER CONNECTION 8

ETHERNETCONNECTION

3. ACCESS RANGE FOR MONITORING

3 - 15

3.3 CC-Link System Access Range for Monitoring