21.3GOT Side Settings

21.3.1Basics of interface selection

This section explains basic knowledge of the multi-channel function.

A general flow of operation from system selection for the multi-channel function to drawing is explained in 21.3.2 to 21.3.6.

It is recommended to refer to 21.3.2 to 21.3.6 when making necessary settings using the multi-channel function for the first time.

Multi-channel function specifications

How the units are installed and the multi-channel function specifications are described below.

17

ROBOT CONTROLLER CONNECTION

18

CNC CONNECTION

(1) Image drawing of unit installation

3rd stage

2nd stage

1st stage

(Example: In the case of the GT1575)

Extension interface 1

Extension interface 2

Extension interface allows the installation of a communication unit up to the 3rd stage, respectively. (For the GT1655, GT155, only one extension interface can be installed.)

A communication unit installed at the 4th or higher stage cannot be used.

Standard interface

For GT16

The RS-232 interface, the USB interface,

the RS-422/485 interface, and the Ethernet interface are built in as the standard interfaces.

For GT15

The RS-232 interface and the USB interface are built in as the standard interfaces.

19

CONNECTION

GOT MULTI-DROP

20

MULTIPLE-GT14, GT12, GT11, GT10 CONNECTION FUNCTION

21

FUNCTION

MULTI-CHANNEL

22

FUNCTION

FA TRANSPARENT

21. MULTI-CHANNEL FUNCTION

21 - 7

21.3 GOT Side Settings