1.6.4Check on GX Developer
Check if the PLC CPU recognizes the GOT (For bus connection) (QCPU (Q mode) only)
Using the [System monitor] of GX Developer, check if the PLC CPU recognizes the GOT or not. For the GX Developer operation method, refer to the following manual.
GX Developer Version
Operating Manual
(1)Check the Module Name, I/O Address and Implementation Position. (The display example is based on GX Developer Version 8)
Startup procedure
GX Developer 
[Diagnostics] 
[System monitor]
Not displayed | No error displayed |
| at all times |
1 - 50 | 1. PREPARATORY PROCEDURES FOR MONITORING |
| 1.6 Checking for Normal Monitoring |