1022
Marker Function
Detector 2
This menu lets you select the detector to be used for Detector 2, or turn Detector 2 off. This is a 1-of-N
menu that shows the normal list of detectors, but with the “Auto” key replaced by “Off”.
Detector 3
This menu lets you select the detector to be used for Detector 3, or turn Detector 3 off. This is a 1-of-N
menu that shows the normal list of detectors, but with the “Auto” key replaced by “Off”.
Remote Command See “Detectors” on page 1020.
Example :CALC:MAM:DET QPE
Sets the detector for measure at marker detector 1 to Quasi peak
:CALC:MAM:DET OFF
Sets the detector for measure at marker detector 1 to Off
Preset Peak
State Saved Saved in instrument state
Readback Text Detector name
Initial S/W Revision A.02.00
Key Path Marker Function, Measure at Marker, Detectors
Remote Command See “Detectors” on page 1020.
Example :CALC:MAM:DET2 QPE
Sets the detector for measure at marker detector 2 to Quasi peak
:CALC:MAM:DET2 OFF
Sets the detector for measure at marker detector 2 to Off
Preset Quasi Peak
State Saved Saved in instrument state
Readback Text Detector name
Backwards Compatibility SCPI [:SENSe]:EMI:MEASure:DETector:QPEak[:STATe] OFF|ON|0|1|
If sent with On as a parameter, sets detector 2 to Quasi Peak
If sent with Off as a parameter, sets detector 2 to Off
Initial S/W Revision A.02.00
Key Path Marker Function, Measure at Marker, Detectors
Remote Command See “Detectors” on page 1020.