Agilent Technologies U9072A cdma-2000 fails, otherwise, it passes. If Power Limit is off, channel power test is always passed.

343
Channel Power Measurement
Meas Setup
fails, otherwise, it passes. If Power Limit is off, channel power test is always passed.
Key Path: Meas Setup, Limits
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: :CALCulate:CHPower:LIMit:POWer <ampl>
:CALCulate:CHPower:LIMit:POWer?
:CALCulate:CHPower:LIMit:POWer:STATe OFF|ON|0|1
:CALCulate:CHPower:LIMit:POWer:STATe?
Example: CALC:CHP:LIM:POW 16.00
CALC:CHP:LIM:POW?
CALC:CHP:LIM:POW:STAT ON
CALC:CHP:LIM:POW:STAT?
Notes: This parameter and PSD Limit can determine Pass/Fail critiera.
If (( power limit = On) and (PSD limit= Off) )
Pass if (power test passes)
Fail if (power test fails)
If (( power limit = On) and (PSD limit= On) )
Pass if ( both power test and PSD test pass)
Fail if ( either of power test or PSD test fails)
If (( power limit = Off) and (PSD limit= On) )
Pass if (PSD test passes)
Fail if (PSD test fails)
If (( power limit = Off) and (PSD limit= Off) )
Always Pass
For WLAN 802.11ac (80 MHz + 80 MHz), the power test and the PSD test are
performed to both carriers. Which means the power (or PSD) readouts of both
carriers should be compared with the power (or PSD) limit individually, and
the test passes only when both values are lower than the limit.
Preset: 16.00
WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD: OFF
WLAN: ON
State Saved: Saved in instrument state.
Min: –200.0
Max: 200.0
Initial S/W Revision: A.10.00