334
Channel Power Measurement
Meas Setup
Meas Setup
Displays the setup menu for the currently selected measurement. The parameters included in this menu
are as follows.
• Averaging
•IF Gain
• Channel Power Span
• Integrated Bandwidth
• Filter Bandwidth
• Root Raised Cosine (RRC) Filter
Avg/Hold Num
Specifies the number of measurement averages used to calculate the measurement result. The average is
displayed at the end of each sweep. After the specified number of average counts, the averaging mode
(terminal control) setting determines the averaging action.
Key Path: Front-panel key
Initial S/W Revision: Prior to A.02.00
Key Path: Meas Setup
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: [:SENSe]:CHPower:AVERage:COUNt <integer>
[:SENSe]:CHPower:AVERage:COUNt?
[:SENSe]:CHPower:AVERage[:STATe] ON|OFF|1|0
[:SENSe]:CHPower:AVERage[:STATe]?
Example: CHP:AVER:COUN 15
CHP:AVER:COUN?
CHP:AVER ON
CHP:AVER?
Notes: You must be in the W-CDMA mode, cdma2000 mode, LTD mode, LTE TDD
mode, WLAN mode, 1xEVDO mode, or WIMAX OFDMA mode to use this
command. Use :INSTrument:SELect to set the mode.