1089
Meas Setup
Demod State (Remote Command Only)
Sets or queries the state of the Analog Demod Tune and Listen function. Setting the state to ON with this
command will select AM demodulation by default and activate it (turn it on).
The response to the query is determined by the current setting of [:SENSE]:DEMod AM|FM|PM|OFF.
The response is 1 if AM, FM, PM are selected, or 0 if OFF is selected.
Remote Command: [:SENSe]:DEMod:STATe OFF|ON|0|1
[:SENSe]:DEMod:STATe?
Preset: OFF
Initial S/W Revision: Prior to A.02.00