1373
Trigger
Baseband I/Q
Pressing this key when it is not selected selects Baseband I/Q as the trigger. Pressing the key when it is
already selected accesses the Baseband I/Q trigger type selection menu. The key is annotated to display
which of the Baseband I/Q trigger types is currently selected.
I/Q Mag
Pressing this key, when it is not selected, selects the I/Q magnitude signal as the trigger. The I/Q
Magnitude trigger condition is met when the I/Q magnitude crosses the I/Q magnitude trigger level. The
magnitude is measured at the output of the main I/Q digital receiver.
Trigger Level
Sets a level for the I/Q magnitude trigger. When the signal crosses this level, with the chosen slope, the
trigger occurs. If the specific Measurement displays the signal from the chosen sampling point a green
Remote Command: :TRIGger[:SEQuence]:FRAMe:SYNC:HOLDoff <time>
:TRIGger[:SEQuence]:FRAMe:SYNC:HOLDoff?
:TRIGger[:SEQuence]:FRAMe:SYNC:HOLDoff:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:FRAMe:SYNC:HOLDoff:STATe?
Preset: On, 1.000 ms
State Saved: Saved in instrument state
Min: 0 ms
Max: +500 ms
Default Unit: s
Initial S/W Revision: Prior to A.02.00
Key Path: Trigge r
State Saved: Saved in instrument state
Readback: The Baseband I/Q trigger source that becomes active when this key is selected
is displayed. The possible values are "I/Q Mag", "I", "Q", "Input I", "Input Q",
and "Aux I/Q Mag".
Initial S/W Revision: Prior to A.02.00
Key Path: Trigger, Baseband I/Q
Example: TRIG:<meas>:SOUR IQM
Readback Text: I/Q Mag
Initial S/W Revision: Prior to A.02.00