Agilent Technologies U9072A cdma-2000 Displays 12 markers available for selection. , Selects the desired marker. The selected marker will be relative to its reference marker.

610
Occupied Bandwidth Measurement
Marker
Select Marker
Displays 12 markers available for selection.
Relative To
Selects the desired marker. The selected marker will be relative to its reference marker.
Key Path: Marker, Properties
Initial S/W Revision: Prior to A.02.00
Key Path: Marker, Properties
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: :CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:R
EFerence <integer>
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:R
EFerence?
Example: CALC:OBW:MARK:REF 2
CALC:OBW:MARK:REF?
Notes: A marker cannot be relative to itself so that choice is grayed out, and if sent
from SCPI generates error –221: “Settings conflict; marker cannot be relative
to itself.”
When queried a single value is returned (the specified marker numbers
relative marker).
You must be in the W-CDMA mode, cdma2000 mode, TD-SCDMA mode,
BLUETOOTH mode, LTE mode, LTE TDD mode, WLAN mode, 1xEVDO
mode, or WIMAX OFDMA mode to use this command.
Use:INSTrument:SELect to set the mode.
Preset: 2|3|4|5|6|7|8|9|10|11|12|1
State Saved: Saved in instrument state.
Min: 1
Max: 12
Readback: Current selected relative to marker number.
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00