938
Input/Output
The correction to be used for each bucket is taken from the interpolated correction curve at the center of
the bucket.
Description
Sets an ASCII description field which will be stored in an exported file. Can be displayed in the active
function area by selecting as the active function, if desired to be in a screen dump.
Comment
Sets an ASCII comment field which will be stored in an exported file. Can be displayed in the active
function area by selecting as the active function, if desired to be in a screen dump.
RF Port
This menu and all of its submenus are only available in the EXT.
Maps one of the sets of corrections to one of the IO ports.
Key Path: Input/Output, Corrections, Properties
Remote Command: [:SENSe]:CORRection:CSET[1]|2|3|4|5|6:DESCription
"text"
[:SENSe]:CORRection:CSET[1]|2|3|4|5|6:DESCription?
Example: :CORR:CSET1:DESC "11941A Antenna correction"
Notes: 45 chars max; may not fit on display if max chars used
Preset: Unaffected by a Preset. Set to empty by Restore Input/Output Defaults
State Saved: Saved in instrument state.
Initial S/W Revision: A.02.00
Key Path: Input/Output, Corrections, Properties
Remote Command: [:SENSe]:CORRection:CSET[1]|2|3|4|5|6:COMMent "text"
[:SENSe]:CORRection:CSET[1]|2|3|4|5|6:COMMent?
Example: :CORR:CSET1:COMM "this is a comment"
Notes: 60 chars max; may not fit on display if max chars used
Preset: Unaffected by Preset. Set to empty by Restore Input/Output Defaults
State Saved: Saved in instrument state
Initial S/W Revision: A.02.00
Key Path: Input/Output, Corrections, Properties
Mode: SEQAN