1106
Peak Search
Next Pk Right
Pressing Next Pk Right moves the selected marker to the nearest peak right of the current marker which
meets all enabled peak criteria. If there is no valid peak to the right of the current marker position, an
error is generated and the marker is not moved.
If the selected marker was off, then it is turned on as a normal marker and a peak search is performed.
Next Pk Left
Pressing Next Pk Left moves the selected marker to the nearest peak left of the current marker which
meets all enabled peak criteria. If there is no valid peak to the left of the current marker position, an error
is generated and the marker is not moved.
If the selected marker was off, then it is turned on as a normal marker and a peak search is performed.
Remote Command :CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:MAXimum:N
EXT
Example CALC:MARK2:MAX:NEXT Selects marker 2 and moves it to the peak that
is closest in amplitude to the current peak, but the next lower value.
Notes Sending this command selects the subopcoded marker.
State Saved Not part of saved state.
Initial S/W Revision Prior to A.02.00
Key Path Peak Search
Remote Command :CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:MAXimum:R
IGHt
Example CALC:MARK2:MAX:RIGH Selects marker 2 and moves it to the next peak
to the right of the current marker position.
Notes Sending this command selects the subopcoded marker.
State Saved Not part of saved state.
Initial S/W Revision Prior to A.02.00
Key Path Peak Search
Remote Command :CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:MAXimum:L
EFT
Example CALC:MARK2:MAX:LEFT selects marker 2 and moves it to the next peak to
the left of the current marker position.
State Saved Not part of saved state.
Initial S/W Revision Prior to A.02.00