276
System Functions
System
Scheduler
Setting the Scheduler to ON will trigger the execution of the scheduled task based on the recurrence and
time set in the scheduler since the last successful of the specific alignment. A warning condition of “RF
Preselector alignment scheduler is ON” will be appeared when the scheduler is set to ON. OFF will turn
off the Scheduler from running any scheduled task.
I/O Config
Activates a menu for identifying and changing the I/O configuration for remote control.
GPIB
Activates a menu for configuring the GPIB I/O port.
Preset: This is unaffected by Preset but is set to SUN on a “Restore System
Defaults->Align”.
State Saved: No
Range: Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|Saturday
Initial S/W Revision: A.08.00
Key Path: System, Alignments, RF Preselector
Mode: All
Remote Command: :CALibration:RFPSelector:SCHeduler:STATe ON|OFF|0|1
:CALibration:RFPSelector:SCHeduler:STATe?
Example: :CAL:RFPS:SCH:STAT OFF
Notes: For model N9038A only.
Preset: This is unaffected by Preset but is set to OFF on a “Restore System
Defaults->Align”.
State Saved: No
Initial S/W Revision: A.08.00
Key Path: System
Initial S/W Revision: Prior to A.02.00
Key Path: System, I/O Config
Initial S/W Revision: A.02.00