772
Modulation Accuracy (Composite Rho)
View/Display
entry of available characters and symbols. You may also use the numeric keypad to enter numbers. Press
Enter or Return to complete the entry. Press ESC to cancel the entry and preserve the existing title.
The display title will remain until you press Change Title again, or you recall a trace or state, or a Factory
Preset is performed. A title can also be cleared by pressing Title, Clear Title.
Pressing this key cancels any active function.
Clear Title
Clears a title from the front-panel display. Once cleared, the title cannot be retrieved.
View Selection (Remote Command only)Allows you to select the desired measurement view from the following selections:
POLar (1): I/Q Measured Polar Graph - Provides a combination view of an I/Q measured polar vector
graph and the summary data as shown below.
ERRor (2): I/Q Error (Tri View) - Provides a combination view of the EVM, magnitude error, and phase
error graphs.
TPHase (3): Power, Timing and Phase-Provides the power of the code channels, and time/phase of the
code channels to pilot channel, and also CDE of each code channel.
XXX…X(n) in the above,
XXX…X: Enum ID for :DISP:RHO:VIEW:SEL
n: Numeric ID for :DISP:RHO:VIEW:NSEL
Mode cdma2000
Remote Command :DISPlay:RHO:ANNotation:TITLe:DATA <string>
:DISPlay:RHO:ANNotation:TITLe:DATA?
Example DISP:RHO:ANN:TITL:DATA “Agilent”
DISP:RHO:ANN:TITL:DATA?
Preset Mod Accuracy
State Saved Saved in instrument state.
Range Uppercase, Lowercase, Numeric, Symbol
Key Path View/Display, Display, Title
Mode cdma2000
Key Path View/Display, Display, Title
Mode cdma2000