1187
Source (Internal)
Current Segment
Specifies the selected sequence segment that will be affected by the menu functions.
Insert New Waveform
Allows you access to the sub-menu for inserting a new waveform segment or sequence. Pressing this key also
changes the central display to show the Waveform File Selection View.
Insert Waveform
Inserts the currently highlighted waveform to the end of the waveform sequence. Pressing this key also returns you
to the menus for creating or editing a sequence, and returns the central view to the sequence creation view.
Segments on Hard Disk
This key functions the same as “Segments on Hard Disk” on page 1174.
Key Path: Source, Modulation Setup , ARB, Waveform Sequences, Build New
Sequence
Notes: No remote command, SCPI front panel only.
This key is grayed out and unavailable if the sequence is currently empty.
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence
Notes: No remote command, SCPIfront panel only.
Waveform segment name string length upper limit is 128 chars. Please do
NOT insert waveform which name string exceeds 128 chars.
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence, Insert New Waveform
Notes: No remote command, SCPIfront panel only.
Wavef orm s egme nt NAME string length upper limit is 128 chars. Please do
NOT insert waveform which name string exceeds 128 chars.
Initial S/W Revision: A.05.00
Key Path: Source, Modulation Setup, ARB, Waveform Sequences, Build New
Sequence, Insert New Waveform
Initial S/W Revision: Prior to A.09.00